AnasayfaKurumsalÜrünlerBelgelerİletişim

METEOROLOJİ HAVA İSTASYONU SENSÖRÜ METEOROLOJİK HAVA İSTASYONU RÜZGAR HIZI SENSÖRÜ-METEOROLOJİK CİHAZLAR METEOROLOJİK CİHAZLAR SERA KÜMES TAVUK ÇİFTLİĞİ ECZA DEPOSU SOĞUK ODA-VERİ TAKİP-KONTROL SİSTEMLERİ VERİ TAKİP-KONTROL SİSTEMLERİ Termohigrometreler-SICAKLIK NEM SICAKLIK NEM Basınç Ölçüm Cihazları DİJİTAL MANOMETRE DİJİTAL BASINÇ ÖLÇÜM CİHAZLARI DİJİTAL MANOMETRELER-BASINÇ BASINÇ Hava Hızı ve Yönü Ölçüm Cihazları Anemometre Meteoroloji-HAVA, RÜZGAR HIZI VE YÖNÜ HAVA, RÜZGAR HIZI VE YÖNÜ Enkoderlar, potansiyometreler, Yaklaşım Sensörler-POZİSYON ÖLÇÜM SENSÖRLERİ POZİSYON ÖLÇÜM SENSÖRLERİ PROXİMİTY SWİTCH YAKLAŞIM İNDÜKTİF POZİSYON PNP NPN-YAKLAŞIM SENSÖRLERİ YAKLAŞIM SENSÖRLERİ Sıcaklık Kontrol Cihazları-PROSES KONTROL VE KAYIT CİHAZLARI PROSES KONTROL VE KAYIT CİHAZLARI Sıcaklık Kontrol Cihazları-Pano Tipi Cihazlar Pano Tipi Cihazlar Kalibrasyon Cihazları-Kalibratörler Kalibratörler Veri Toplama Sistemleri-Kayıt Cihazıarı-Veri Toplama Sistemleri Kayıt Cihazıarı-Veri Toplama Sistemleri Sinyal Transmitteri-Sinyal Dönüştürücüler Sinyal Dönüştürücüler Akış Hızı Flow Miktar Ölçümü-DEBİ ÖLÇÜMÜ DEBİ ÖLÇÜMÜ Malzeme Sertlik Kalite Test Cihazı-MALZEME TEST MALZEME TEST Dijital Dinamometreler-KUVVET ÖLÇÜM KUVVET ÖLÇÜM Elektrik Ölçüm Cihazları-ELEKTRİKSEL ÖLÇÜM ELEKTRİKSEL ÖLÇÜM Ultrasonik Malzeme Kalınlık Ölçer-KALINLIK ÖLÇÜM KALINLIK ÖLÇÜM Desibelmetreler-GÜRÜLTÜ ÖLÇÜM GÜRÜLTÜ ÖLÇÜM Luxmetreler-IŞIK ŞİDDETİ IŞIK ŞİDDETİ Gaz Ölçüm Analiz Cihazları-GAZ ÖLÇÜM CİHAZLARI GAZ ÖLÇÜM CİHAZLARI Ağırlık Ölçer-TERAZİ VE BASKÜLLER TERAZİ VE BASKÜLLER Etalon Kütleler-KÜTLE ve KÜTLE SETLERİ KÜTLE ve KÜTLE SETLERİ Boyutsal Ölçme Aletleri-BOYUT BOYUT ETÜV İNKÜBATÖR STERİLİZATÖR İKLİMLENDİRME KABİNİ SOĞUTMALI ÇALKALAMALI-TEST KABİNLERİ TEST KABİNLERİ Termos Azot Taşıma-NUMUNE SAKLAMA VE TAŞIMA KAPLARI NUMUNE SAKLAMA VE TAŞIMA KAPLARI Devir Ölçüm Cihazları-TAKOMETRE-DEVİR ÖLÇER TAKOMETRE-DEVİR ÖLÇER Zaman Sayaçları-KRONOMETRELER KRONOMETRELER İSG Ölçüm Cihazları-İŞ SAĞLIĞI VE GÜVENLİĞİ İŞ SAĞLIĞI VE GÜVENLİĞİ ph iletkenlik ölçüm cihazları-ANALİTİK ÖLÇÜM ANALİTİK ÖLÇÜM PİKNOMETRE VİSKOZİTE ÖLÇÜM YOĞUNLUK-YOĞUNLUK-VİSKOZİTE YOĞUNLUK-VİSKOZİTE MENGENE LABORATUVAR MENGENESİ ÇEŞİTLİ ÖLÇÜM CİHAZLARI-ÇEŞİTLİ ÜRÜNLER ÇEŞİTLİ ÜRÜNLER




PROSES KONTROL VE KAYIT CİHAZLARI > Kalibratörler >

"SıCAKLıK KALIBRATöRü" AOIP CALYS 75 MULTIFONKSIYONEL PROSES KALIBRATöRü-SıCAKLıK KALIBRATöRü | KRAFT TEKNIK ÖLçüM CIHAZLARı
Multifonksiyonel Proses Kalibratörü-Sıcaklık Kalibratörü
Multifonksiyonel Proses Kalibratörü-Sıcaklık Kalibratörü
Marka : AOIP
Model : CALYS 75
Ürün Kodu : CALYS75
"SıCAKLıK KALIBRATöRü" AOIP CALYS 75 MULTIFONKSIYONEL PROSES KALIBRATöRü-SıCAKLıK KALIBRATöRü | KRAFT TEKNIK ÖLçüM CIHAZLARı
Özellikler

Sensor Range (Input and Output) Resolution Accuracy / 1 year (Measurement) Accuracy / 1 year (Simulation)
Pt50 (α = 3851) -220°C to +1200°C 0.01°C 0.012% RDG + 0.06°C 0.014% RDG + 0.18°C
Pt100 (α = 3851) -220°C to +1200°C 0.01°C 0.012% RDG + 0.05°C 0.014% RDG + 0.12°C
Pt100 (α = 3916) -200°C to +510°C 0.01°C 0.012% RDG + 0.05°C 0.014% RDG + 0.12°C
Pt100 (α = 3926) -210°C to +850°C 0.01°C 0.012% RDG + 0.05°C 0.014% RDG + 0.12°C
Pt200 (α = 3851) -220°C to +600°C 0.01°C 0.012% RDG + 0.12°C 0.014% RDG + 0.33°C
Pt500 (α = 3851) -220°C to +1200°C 0.01°C 0.012% RDG + 0.07°C 0.014% RDG + 0.18°C
Pt1000 (α = 3851) -220°C to +1200°C 0.01°C 0.012% RDG + 0.05°C 0.014% RDG + 0.08°C
Ni100 (α = 618) -60°C to 180°C 0.01°C 0.012% RDG + 0.03°C 0.014% RDG + 0.08°C
Ni120 (α = 672) -40°C to +205°C 0.01°C 0.012% RDG + 0.03°C 0.014% RDG + 0.08°C
Ni1000 (α = 618) -60°C to +180°C 0.01°C 0.012% RDG + 0.03°C 0.014% RDG + 0.08°C
Cu10 (α = 427) -50°C to 150°C 0.01°C 0.012% RDG + 0.18°C 0.014% RDG + 0.1°C
Cu50 (= 428) -50°C to +150°C 0.01°C 0.012% RDG + 0.06°C 0.014% RDG + 0.15°C

Resistive probes measurements in 2, 3 or 4 wires: automatic recognition of number of connected wires, with indication on screen
Accuracies are given for 4-wire mounted probes
Take into account particular error of temperature sensor used and implementation conditions
Measuring current: 0.25 mA (Measurement) or from 0.1 to 1 mA (Emission)
Temperature coefficient: < 10% of accuracy /°C

Thermocouples: Measurement and simulation

Type Input range Resolution Accuracy / 1 year (Measurement) Output range Resolution Accuracy / 1 year (Simulation)
K -250 to -200°C
-200 to -120°C
-120 to +0°C
0°C to +1372°C		 0.2°C
0.1
0.05°C
0.05°C		 0.8°C
0.25°C
0.1°C
0.013% RDG + 0.08°C		 -240 to -50°C
-50 to -0°C
+0°C to +1372°C		 0.2°C
0.1
0.05°C		 0.6°C
0.1°C
0.013% RDG + 0.08°C
T -250 to -200°C
-200 to -120°C
-120 to -50°C
-50 to +400°C		 0.2°C
0.05°C
0.05°C
0.05°C		 0.7°C
0.25°C
0.1°C
0.013% RDG + 0.08°C		 -240 to -100°C
-100 to -0°C
+0 to +400°C		 0.2°C
0.05°C
0.05°C		 0.4°C
0.1°C
0.013% RDG + 0.08°C
J -210 to -120°C
-120 to +0°C
+0 to +1200°C		 0.05°C
0.05°C
0.05°C		 0.25°C
0.09°C
0.013% RDG + 0.07°C		 -210 to -0°C
+0 to +1200°C		 0.05°C
0.05°C		 0.2°C
0.013% RDG + 0.07°C
E -250 to -200°C
-200 to -100°C
-100 to -0°C
+0 to +1000°C		 0.1°C
0.05°C
0.05°C
0.05°C		 0.45°C
0.15°C
0.07°C
0.013% RDG + 0.05°C		 -240 to -100°C
-100 to +40°C
+40 to 1000°C		 0.1°C
0.1°C
0.05°C		 0.25°C
0.1°C
0.013% RDG + 0.05°C
R -50 to +150°C
+150 to +550°C
+550 to 1768°C		 0.5°C
0.2°C
0.1°C		 0.8°C
0.013% RDG + 0.35°C
0.013% RDG + 0.2°C		 -50 to +350°C
+350 to +900°C
+900 to 1768°C		 0.5°C
0.2°C
0.1°C		 0.5°C
0.013% RDG + 0.35°C
0.013% RDG + 0.2°C
S -50 to +150°C
+150 to +550°C
+550 to +1768°C		 0.5°C
0.2°C
0.1°C		 0.80°C
0.013% RDG + 0.35°C
0.013% RDG + 0.25°C		 -50 to +120°C
+120 to +450°C
+450 to +1768°C		 0.5°C
0.2°C
0.1°C		 0.8°C
0.013% RDG + 0.35°C
0.013% RDG + 0.25°C
B +400 to +900°C
+900 to +1820°C		 0.2°C
0.1°C		 0.013% RDG + 0.4°C
0.013% RDG + 0.2°C		 +400 to +850°C
+850 to +1820°C		 0.2°C
0.1°C		 0.013% RDG + 0.4°C
0.013% RDG + 0.2°C
U -200 to +660°C 0.05°C 0.15°C -200 to +600°C 0.05°C 0.15°C
L -200 to +900°C 0.05°C 0.2°C -200 to +900°C 0.05°C 0.2°C
C -20 to +900°C
+900 to 2310°C		 0.1°C
0.1°C		 0.25°C
0.013% RDG + 0.15°C		 -20 to +900°C
+900 to 2310°C		 0.1°C
0.1°C		 0.25°C
0.013% RDG + 0.15°C
N -240 to -190°C
-190 to -110°C
-110 to +0°C
+0 to +1300°C		 0.2°C
0.1°C
0.05°C
0.05°C		 0.5°C
0.15°C
0.08°C
0.013% RDG + 0.06°C		 -240 to -190°C
-190 to -110°C
-110 to +0°C
+0 to +1300°C		 0.2°C
0.1°C
0.05°C
0.05°C		 0.3°C
0.15°C
0.08°C
0.015% RDG + 0.06°C
Platinum -100 to +1400°C 0.05°C 0.3°C -100 to +1400°C 0.05°C 0.3°C
Mo +0 to +1375°C 0.05°C 0.013% RDG + 0.06°C +0 to +1375°C 0.05°C 0.013% RDG + 0.06°C
NiMo/NiCo -50 to +1410°C 0.05°C 0.013% RDG + 0.30°C -50 to +1410°C 0.05°C 0.013% RDG + 0.3°C

Thermocouples: D and G, for specifications, refer to the instruction manual (Available on request)
Accuracy is given for reference @ 0°C.
When using the internal reference junction (except couple B) add an additional uncertainty of 0.2 °C at 0 °C.
It is possible (thermocouple B excepted) to choose by programming the cold junction localization: External at 0°C, internal (temperature compensation of instrument’s terminals) or manually entered.
Temperature coefficient: <10% of accuracy /°C
Display unit: °C and F

Specifications and performances in pressure @23°C ±5°C

Pressure: Measurement by external digital sensor

Range 0-1 bar 0-3 bar 0-10 bar 0-30 bar 0-100 bar 0-300 bar 0-1000 bar
Absolute X X X X X X X
Relative X X X X      

Available in relative, absolute and differential pressure.
Connector: ¼ gas
Resolution: 0.02% FS
Accuracy:
-0.05% FS from 10 to 40°C
- 0.1% FS from -10 to +10°C and from 40 to 80°C

This digital pressure module ACL433 is connected to CALYS 75 through RS485 serial cable to the digital input connector. All data are digital. Measurements are compensated in temperature by a polynomial correction implemented into the firmware at factory.

Specifications and performances in process @23°C ±5°C

DC current: Measurement

With or without loop supply

Range Res. Accuracy / 1an Rin
0-20 mA 1 µA 0.0175% RDG + 2 µA < 25 Ω
4-20 mA 1 µA 0.0175% RDG + 2 µA < 25 Ω
±50 mA 1 µA 0.0175% RDG + 2 µA < 25 Ω

Temperature coefficient: < 10 ppm/°C beyond reference domain
Loop supply: 24 V ±10%
HART® compatibility: Input impedance Rin = 280 Ω
Display with linear or quadratic scaling

DC voltage: Measurement

Range Res. Accuracy / 1an Rin
100 mV 1 µV 0.013% RDG + 3 µV > 10 MΩ
1 V (1) 10 µV 0.013% RDG + 20 µV > 10 MΩ
10 V 100 µV 0.015% RDG + 200 µV > 1 MΩ
50 V 1 mV 0.015% RDG + 2 mV > 1 MΩ

Temperature coefficient < 7 ppm/°C beyond reference domain
(1) Specification domain: -0.8 V to +1 V

Frequency, counting: Measurement

Range Resolution Accuracy / 1an
20 kHz 0.01 Hz 0.005% RDG

Temperature coefficient < 5 ppm/°C beyond reference domain
Scale unit: Pulse / min and Hz
Trigger level: 1 V
Measurement on frequency signals or dry contacts
Counting will be performed on defined time or infinite time.

Resistance: Measurement

Range Resolution Accuracy / 1an
400 Ω 1 mΩ 0.012% RDG + 10 mΩ
400 Ω 10 mΩ 0.012% RDG + 100 mΩ

Resistance measurement in 2, 3 or 4 wires: automatic recognition of number of connected wires, with indication on screen
Accuracies are given for 4-wire mounted probes
Temperature coefficient: < 7 ppm/°C beyond reference domain
Open circuit terminal voltage: < 10 V
Continuity test: Open circuit for R > 1000 Ω and closed circuit for R < 1000 Ω
Measurement current: 0.25 mA

DC current: Emission

With or without loop supply

Range Resolution Accuracy / 1an
24 mA 1 µA 0.0175% RDG + 2 µA
4-20 mA 1 µA 0.0175% RDG + 2 µA
0-20 mA 1 µA 0.0175% RDG + 2 µA

Temperature Coefficient < 10 ppm/°C beyond reference domain
Settling time: < 5 ms
Specifications given for CALYS configurations in:
- Active mode (+24V ON) 1  Meter in passive mode (+24 V OFF)
- Passive mode (+24 V OFF) 1 Meter in active mode (+24 V ON)
Pre-programmed steps
                               0%       25%      50%      75%     100%
4-20 mA linear            4          8         12         16        20
0-20 mA linear            0          5         10         15        20
4-20 mA quad             4          5          8         13        20
0-20 mA quad             0        1.25        5       11,25      20
4-20 mA valves    3.8-4—4.2               12               19, 20, 21

DC voltage: Emission

Range Res. Accuracy / 1an Min load
100 mV 1 µV 0.013% RDG + 3 µV 1 kΩ
2 V 10 µV 0.013% RDG + 20 µV 2 kΩ
20 V 100 µV 0.015% RDG + 200 µV 4 kΩ
50 V 1 mV 0.015% RDG + 2 mV 4 kΩ

Noise: 3 ppm (for 0.1 Hz to 10 Hz) and 5 ppm (for 10 Hz to 100 Hz)
Temperature coefficient: < 7 ppm/°C beyond reference domain
Settling time: < 5 ms

Frequency, pulse: Emission

Range Resolution Accuracy / 1an
1000 Hz 0.01 Hz 0.005% RDG
10 kHz 0.1 Hz 0.005% RDG

Temperature coefficient < 5 ppm/°C beyond reference domain

Resistance: Emission

Range Res. Accuracy / 1an Nota
Iext
40 Ω 1 mΩ 0.014% RDG + 3 mΩ
0.014% RDG + 10 mΩ		 10 mA
1 mA
400 Ω 10 mΩ 0.014% RDG + 20 mΩ
0.014% RDG + 30 mΩ		 10 mA
1 mA
4000 Ω 100 mΩ 0.014% RDG + 300 mΩ 0.1 / 1 mA

Temperature coefficient: < 5 ppm/°C beyond reference domain
Current establishing time: < 1 ms
Iext: Current received by the calibrator

Further features

Scaling in measurement and simulation modes Scaling allows process signals to be displayed in % of FS or in all other units. This function also allows sensors to be corrected after a calibration.
Relative measurement The features allows the following :
  • Programming a reference value different from the one of the instrument (NUL function).
  • Subtracting of constant value by measuring or programming it from a measured value (TARE function).
Simulation menu Simulation value is set by entering value on keypad or by changing the specific digit with the cursor.
Square root In current measurement and simulation, this function allows taking into account a quadratic signal coming from transmitter of type ΔP.
Statistical functions Continuous display of average, minimum and maximum value of the signal under monitoring, as well as number of measurements.
Transmitters tests Transmitters can be verified using user procedures. 20 procedures can be stored as well as test results. Deviation curves are displayed.
Edition of comprehensive test reports.
Switch test In temperature or pressure mode, CALYS 75 can control electronic thermostat and pressostat trigger levels.
Ramps generation Starting, ending and length time values of simple or cyclic ramps can be set to do simulation.
Number of ramps can also be adjusted in case of cyclic ramps for any signals.
Steps simulation 2 modes are available:
  • Program mode: Starting value, number of steps and the length time have to be set
  • Manual mode: User has about a hundred preset values

In current simulation, user will have some additional preset values in function of range and according to 0%, 25%, 50%, 75% and 100% from selected gauge. Choice is done between gauges:
0-20 mA: linear or quadratic
4-20 mA: linear or quadratic
Synthesizer With 100 values manually set, CALYS 75 enables users to draw a generation curve.
Transmitter function CALYS 75 is able to be used as a transmitter. Measurement input is copied on the output with scaling.

General specifications

Size 210 x 110 x 50 mm
Weight 900 g
Display 240 x 320 pixel liquid crystal graphical display with backlite and contrast control
Display of result as table of values or trend curve
Power supply 230 V ± 10 %, 50/60 Hz
Battery Type: Lithium-ion
Charging Time: 3 hours
Lifetime: 8 hours
Communication ports USB
Storage capacity Up to 10 full configurations (Input / output type, range…)
10,000 data into one or several measurement campaigns, i.e. more than one week work with configurations, measurements, calibration procedures and reports

Environmental specifications

Reference range 23°C ± 5°C (RH: 45 to 75 % w/o condensing)
Operating reference range -10 to 50°C (RH: 20 to 80 % w/o condensing)
Limit operating range -15°C to +55°C (RH: 10 to 80 % w/o condensing) (70% at 55°C)
Storage temperature limits -30°C to +60°C
Maximum height 0 to 2000 m
IP protection IP54 according to EN60529

Safety specifications

Protections
  • Electronic protection up to 250 V for ‘voltage’ wires
  • Fuse protection for ‘current’ wires
  • Protection against ‘current’ circuit breaking during inductive resistance measurements
Class In accordance with EN 61010-1
Category II, pollution 2
Rated voltage 60 V
Chocks and vibrations EN 61010-1
EMC conformity Immunity:
  • EN 61000-4-2
  • EN 61000-4-3
  • EN 61000-4-5
  • EN 61000-4-6
  • EN 61000-4-11

EN 61000-4-4
Conducted and radiated emissions:

  • EN 55022, class B
  • EN 61000-3-2
  • EN 61000-3-3
"SıCAKLıK KALIBRATöRü" AOIP CALYS 75 MULTIFONKSIYONEL PROSES KALIBRATöRü-SıCAKLıK KALIBRATöRü | KRAFT TEKNIK ÖLçüM CIHAZLARı



E-Posta Abonemiz Olun     
Kampanyalarımızdan Habersiz Kalmayın...  
AnasayfaKurumsalÜrünlerBelgelerİletişim